IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.
Your wireless speaker doesn't support deleting just one set of pairing information. Initialize your speaker to delete all pairing information. Select your speaker model, turn it on (except for CAS-1), and then follow the instructions provided to initialize the speaker.
CAS-1
- Turn off your speaker.
- Press and hold the
(on/standby) button for over ten seconds while the device is turned off.
- The LED status indicators will flash quickly.
GTK-XB60 or GTK-XB90
Press and hold the FUNCTION 
PAIRING button and VOLUME - button simultaneously for more than five seconds.
LF-S50G
Press and hold the 
(microphone off) button until all four status LEDs light in orange.
LSPX-S1
Press and hold the 
(volume) - button and the on/standby (power) button simultaneously for five seconds.
SRS-X1
Press and hold the 
(previous) button, the (power) PAIRING button, and the VOL + button simultaneously for more than five seconds.
SRS-X9, SRS-X7, SRS-X99, SRS-X88, or SRS-X77
Tap and hold the VOL - button and the ON/STANDBY button simultaneously for more than five seconds.
SRS-XB3, or SRS-XB2
Press and hold the 
(power) button and the VOLUME - button simultaneously for more than five seconds.
SRS-X11
Press and hold the (power) button, the VOL - button, and the VOL ＋ button simultaneously for more than five seconds.
SRS-BTD70
Press and hold the VOLUME - button and the INPUT/PAIRING button simultaneously for more than five seconds.
SRS-HG10
Press and hold the + volume button and the SET UP button simultaneously for more than five seconds.
SRS-ZR7, SRS-ZR5, SRS-XB41, SRS-XB40, SRS-XB31, SRS-XB30, SRS-XB21, SRS-XB20, SRS-XB10, or SRS-HG1
Press and hold the Volume - button and the (power) / PAIRING button simultaneously for more than five seconds.
