Updates of this version

Improvements

• Indication of "Monitor F Key" function is changed when you use the monitor with the BVMK-R10.
• Indication Area of Markers and Grid Display.

Bug fixes

• False Color Scale is displayed at the left edge when "Pixel Zoom" is working.
• Some other bugs are fixed.

Updates of V2.00

The following new features, improvements, and bug fixes are available.

New functions

• Side-by-Side display of 4K SDI/IP signals
• BVMK-R10 support
• Setting copy function among BVM-HXxx10
• Additional support for Closed Caption over 3G-SDI signals
• Source ID display
• Status F key
• Picture out Display
• H/V Delay
• Scopes 2x display
• IP Interface function Status display over Web menu

Improvements

• Peak Lumi. 4000/3000/2000/1000/700/600/500/400 from Peak Lumi.4x, 2x and Off
• 300% Pixel Zoom function from 9 zones of the screen
• Tally response time

Bug fixes

• Embedded Audio
• Native Scan about 1920 x 1080/24PsF
• Noises about non-selected SDI input
• Accuracy of long-term color temperature reinforcement

For further details, please refer to the Release Notes for_BVM-HX3110_V2_00(EN).pdf.

Applicable version

BVM-HX3110 Ver.1.00 or later

Note: 
The software version for the monitor can be found on the Unit Status of the Status menu.

Preparation

When updating Monitor body,

• You will need 1 USB memory stick for the installation.
  Specification: USB 3.0 up to 8GB, FAT32 format
  For more details, please read "Handling a USB memory stick" in the operating instructions of the BVM-HX3110.

When updating NET board,

• Prepare the following IP network connection environment.
  • IP network switch (25/1 Gbps ports)
  • SFP28 Transceiver module
  • Optical fiber cable
  • Media converter (1Gbps, SFP to RJ-45)
  • LAN cable
  • PC (for operation of Web menu, Browser is required.)
  • Recommended browser: Chrome (The latest version is required.)

* Chrome browser and Chrome are trademarks of Google LLC.

Note:

• You need to update both the software and the hardware/FPGA. You also need to update both the Bootloader and Software Package of the NET board.
  • Refer to the following information for the estimated update time for each BVM-HX3110 unit.
  • Monitor body(Software / FPGA): this update procedure takes approx. 109 minutes per unit.
  • IP interface function <NET board>, this update procedure takes approx.2 minutes for the Bootloader and approx. 6 minutes for the Software Package.

How to update

• Please refer to "Release Notes_for_BVM-HX3110_V2_01(EN)_revision_1.pdf".
• If the update of "Software Package" is executed FIRST, the update of "Bootloader" will fail displaying a file error. To fix this, download "BVM-HX3110_Bootloader_for_update_error.zip" from the Sony support site and follow "Note for BVM-HX3110_V2_Bootloader_update_error(EN).pdf".

Note: 
When you execute this Software Package of the IP interface of the BVM-HX3110, the monitor may restart automatically without displaying the "Firmware Update is succeeded." message, and error messages such as Error# 902 or Error #990 may appear. Please note that this does not indicate a malfunction — the update has been completed successfully. Please click "OK" on the error message, reload the Web browser page, and then proceed to Section 6-3, "Confirmation of the update completion ‐NET board".