Article ID : 00148934 / Last Modified : 05/02/2016

Does the car stereo support LDAC audio files?

How do I play by LDAC?

Applicable Products and Categories of This Article

LDAC is supported.

To play audio using LDAC, perform the following setup.

  1. Press and hold MENU on the remote commander.
  2. Select BT Setting.
  3. Select Audio Codec.
  4. Select Auto and then press ENTER.

If using LDAC for playback, you must also set it up from the connected device. For more on setting up LDAC from the connected device, refer to the instruction manual for the connected device and confirm the setting process.