Article ID : S700006371 / Last Modified : 03/30/2018

Tablet S or P: soft reset

Tablet S or P: soft reset

Applicable Products and Categories of This Article


Tablet S: If the tablet does not start and/or turn off, keep the reset hole pressed for 3-4 seconds (make sure sure the LED will blink 2-3 times before releasing the reset hole). Do it with a bent-open paper clip. Note: Don't use a needle, pin or pen to avoid damage to the reset button.

Tablet P: to reset the Tablet P, disconnect from the power supply, remove the battery, then reinsert the battery again and turn it on.

  1. Press the two buttons to open the bottom cover
  2. Remove the battery pack and reinsert it again after having replaced the bottom cover. Connect the Tablet to the power supply.